Micro Duct Connector - Fiber Optic Cabling Management

•Working Pressure: 16 Bar (For Air Blown Fibre System)

•Working Temperature:-20 C-+50 C

•Fluid: Compressed Air

•Lifespan:20 Years

•Standards: EN50411-2-8

•Body: Polycarbonate

•Seal: NBR

•Washer: Polyacetal

•Lock Claws: SUS

•Collar: Polyacetal

•Sleeve: Polyacetal

OD: Outer Diameter

ID: Inner Diameter

Please confirm the micro-duct outer diameter whether has damaged or scratches ，connection face must be clean.
Please confirm the micro-duct outer diameter nominal tolerances meets+0.1mm.
Please make sure the connection micro-duct end face is cut into the rectangular plane.
Please confirm the micro-duct should be through it the sealing ring， has been pushed to the end of the joint ，until it couldn’t go far again.
After connecting the micro-ducts ，must check whether the duct can pull，then put into use.
When disassembling the micro-ducts, ，please make sure the pressure is 0.

		Description: Connecting two micro ducts which are the same outer diameter • Easy installation, without any special tools • Transparent plastic body，easy to observe the situation • High-temperature resistance-40 ‘c 65 ‘c • High-pressure resistance>25bar • Standard EN50411-2-8 • Fire Resistance styles also available(Optional)
Model	Duct OD/ID (mm)		Packing (pcs/CTN)
S3/2.1	3/2.1		5000
S4/2.5	4/2.5		3000
S5/2.1	5/2.1		3000
S5/3.5	5/3.5		3000
S6/4	6/4		3000
S7/3.5	7/3.5		2000
S7/4	7/4		2000
S7/5.5	7/5.5		2000
S8/3.5	8/3.5		2000
S8/5	8/5		2000
S8/6	8/6		2000
S8.5/6	8.5/6		2000
S10/6	10/6		1000
S10/8	10/8		1000
S12/8	12/8		1000
S12/9	12/9		1000
S12/10	12/10		1000
S12.7/10	12.7/10		1000
S14/10	14/10		800
S14/12	14/12		800
S15/12	15/12		800
S16/12	16/12		600
S16/13	16/13		600
S18/12	18/12		400
S18/14	18/14		400

			Description •Connect two micro ducts which are different outer – diameter .Internal cone hole to prevent fiber hang up •Easy installation without any special tools • Transparent plastic body，easy to observe the situation • High-temperature resistance -40 C -65 C • High-pressure resistance >25bar • Standard EN 50411- 2-8
Model	Duct OD/ID (mm) (Bigger Port)	Duct OD/ID (mm) (Smaller Port)		Reduction	Packing (Pcs/CTN)
R5/2.1	5/3.5	3/2.1		3.5>2.1	3000
R5/2.8	5/3.5	4/2.8		3.5>2.8	3000
R7/2.1	7/5.5	3/2.1		5.5>2.1	2000
R7/2.8	7/5.5	4/2.8		5.5>2.8	2000
R7/3.5	7/5.5	5/3.5		5.5>3.5	2000
R8/2.1	8/6	3/2.1		6>2.1	2000
R8/3.5	8/6	5/3.5		6>3.5	2000
R8/5.5	8/6	7/5.5		6>5.5	2000
R10/3.5	10/8	5/3.5		8>3.5	1000
R10/5.5	10/8	7/5.5		8>5.5	1000
R10/6	10/8	8/6		8>6	1000
R12/3.5	12/10	5/3.5		10>3.5	1000
R12/5.5	12/10	7/5.5		8>5.5	1000
R12/6	12/10	8/6		8>6	1000
R12/8	12/10	10/8		10>8	1000
R12.7/10	12.7/10	12/10		12.7>10	1000
R14/3.5	14/10	7/3.5		10>3.5	1000
R14/8	14/12	10/8		12>8	1000
R14/10	14/12	12/10		12>10	1000
R16/8	16/13	10/8		13>8	800
R16/1210	16/13	12/10		13>10	600
R16/1410	16/13	14/10		13>10	600
R18/10	18/14	14/10		14>10	500

				Description •Used to seal an open micro duct. •Easy installation, without any special tools • Transparent plastic body，easy to observe the situation. •High temperature resistance-40 “C -65 “C. • Standard EN50411-2-8
Model	Duct OD(mm)	Packing (pcs/CTN)	Model		Duct OD(mm)	Packing (pcs/CTN)
ES3	3	6000	ES12		12	2000
ES4	4	5000	ES12.7		12.7	2000
ES5	5	5000	ES14		14	1600
ES6	6	4000	ES15		15	1000
ES7	7	4000	ES16		16	1000
ES8	8	4000	ES18		18	800
ES10	10	2000

				Description •Used to seal an open micro duct- temporarily •Easy installations. •Dirt and watertight up.
Model	Duct OD(mm)	Packing (pcs/CTN)	Model		Duct OD(mm)	Packing (pcs/CTN)
EC5	5	5000	EC12		12	1000
EC6	6	5000	EC14		14	1000
EC7	7	2000	EC16		16	500
EC8	8	2000	EC18		18	500
EC10	10	2000	EC20		20	500

Description

•While effectively prevent accidental removal of micro ducts ，

strengthen the protection of connectors.

•Can also be used to directly buried applications.

• Size: 5, 7, 8，10，12，14，16，18mm available.

•The products use the plastic-PP (Polypropylene)

Description

•Effectively prevent accidental removal of micro ducts

•Size : 7, 8, 10, 12, 14mm available.

			Description •Used in rack systems to manage micro-ducts. •Easy installation, without any special tools • High-temperature resistance-40 C -65 -C • High-pressure resistance>25bar •Standards EN50411-2-8
Model	Duct OD/ID(mm)	Mounting Size (mm)		Packing (pcs/CTN)
B5/3.5	5/3.5	12		3000
B6/4	6/4	14		2000
B8/6	8/6	16		2000
B10/8	10/8	20		1000
B12/10	12/10	22		800
B14/10	14/10	24		600